Mitel 5604 Betriebsanweisung PDF herunterladen (Seite 20)

Mitel 5604 Wireless Handset User Guide

In Text Input Mode

• A short press on a key 0-9, displays the first available character on that specific key. The

marked character is selected after a timeout, or when another key is pressed.

• You change to upper/lower case, by pressing the * key before entering the character. The

* key can also be used to display only the digits.

• To add space in the text, make a short press on key 0.

• The first character entered in a message, or when adding/editing a name in the Contacts

menu, will be an upper level character followed by lower level characters (unless the * key

is pressed before you enter the character). To switch between Abc, ABC, abc, and 123 you

press the * key.

• A long press on the #-key displays special characters.

Headset

If you will use your handset frequently, we recommended you use a headset so you have both

hands free. The headset comes in three versions; microphone integrated in the cable,

microphone on a boom and hearing protection.

In order to achieve optimal audio quality with your headset we recommend you select the

corresponding headset profile.

The default setting is microphone on a boom, that is, the audio is optimized for using a headset

with microphone on a boom. The headset profile can be changed in the menu by do as follows:

1. Enter the menu by pressing the “Menu” soft key, or the confirmation button on the Navigation

key.

2. Select "Connections".

3. Press "Select", or the confirmation button on the Navigation key.

4. Select "Headset".

5. Select the corresponding headset profile from list, that is, "Mic on boom", "Mic on cable",

or "Hearing protection".

6. Press "Select", or the confirmation button on the Navigation key.

If the pre-configured headset profiles do not match the headset in use, or the audio performance

is bad, it is possible to configure an own headset profile. This is done in the PDM, see the Mitel

5604 Wireless Handset Configuration Guide. If an own profile is configured in the PDM, it will

be selectable in the handset menu.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 87 88

Keine Kommentare

Mitel 5604 Betriebsanweisung Seite 20