Mitel UC360 Betriebsanweisung PDF herunterladen (Seite 76)

UC360 Administration and User Guide

Upgrade System Software

1. Press Settings

2. Press Advanced

3. Press System Settings

4. Select Upgrade system S/W

You have several options for upgrading the system software as new software loads from Mitel

become available: SD Card or HTTP.

SD Card Upgrade

The SD card must contain the file named upgrade.xml and the upgrade file package, typically

named update.zip, in the top-level folder. Mitel will supply these files with each new software

load. The upgrade.xml file name will contain the new software load version.

1. Insert the SD card with the software upgrade

2. Select Upgrade system S/W now

3. Select SD Card

You will see a series of messages. This can take several minutes; the UC360 will power

off and then on. The UC360 will reboot and load the new software.

4. Unmount the SD card (see “Unmount SD Card” on page 69)

HTTP Server Upgrade

1. Select HTTP Server Address and enter the IP address of the HTTP server where new

sofware loads are stored.

2. Select Upgrade system S/W now

3. Select HTTP

You will see a series of messages. This can take several minutes; the UC360 will power

off and then on. The UC360 will reboot and load the new software.

HTTP Server Upgrade via MAS/MBG

When the UC360 is programmed as a Teleworker device, use the following instructions to

upgrade the UC360 software.

1. Login to the MAS server at the root level using an application that allows file transfers.

2. Copy the UC360 load and upgrade files to the /home/e-smith/files/ibays/Primary/html

directory.

3. On the UC360, set the HTTP Upgrade IP address to the WAN-side IP setting of the MBG.

4. Perform a UC360 upgrade using the normal upgrade procedure.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 98 99

Keine Kommentare

Mitel UC360 Betriebsanweisung Seite 76