Mitel SX-50 Bedienungsanleitung PDF herunterladen (Seite 11)

Plan the Interface

PN: 1725-36137-001_E.doc

Function Menu Programming

SpectraLink 6300 MCU

Note that the function menu defaults set for the handsets associated

with the SpectraLink 6300 MCU can be changed via the SpectraLink

Operator’s Console. If the system uses softkeys, to minimize

unwanted interaction between system display and the handset

function menu display, configure the handset menu to include a delay

of one function key. The user will then have to press

FCN twice before

the handset menu displays, allowing the first press of the

FCN key to

access softkey functions. See SpectraLink 6300 MCU: Operator’s Console

for further procedural information. Another option may be to disable

the softkey menu at the system and exclusively use the SpectraLink

menu. This would remove any unwanted interaction, but may restrict

the number of available features to the number of programmable keys

on the handset.

SpectraLink 6000 MCU

For the SpectraLink 6000 MCU, the handset function menu can only

be changed via remote configuration through the services of Polycom

Customer Support.

SpectraLink 8000 Telephony Gateways

Menu options can be changed in the Administration Console of the

SpectraLink 8000 Telephony Gateways. The Delay function is used

when the PBX uses softkeys. With Delay, when the

FCN key is

pressed, the handset displays the features that are associated with the

softkeys so that one of these features can be selected first. If Delay is

programmed, pressing the

FCN key twice will bring up the menus

immediately. Under the menu programming section of the

Administration console there is an option to use Delay (same as the

SpectraLink 6300 MCU). See SpectraLink 8000 Telephony Gateway:

Administration Guide for SRP for further details. Also refer to the same

document for details on configuring the telephone switch type

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

Keine Kommentare

Mitel SX-50 Bedienungsanleitung Seite 11