Mitel SIP USER AND ADMINISTRATOR GUIDE 5320 Spezifikationen PDF herunterladen (Seite 29)

5320 SIP Phone SIP User and Administrator Guide

- 23 -

2. Hang up the handset. Use the headset to communicate with your party.

To go from headset to handset mode:

1. Lift the handset.

2. Press the Headset key. The Headset key turns OFF. Use the handset to communicate with

your party.

Switch between Headset and Handsfree

To go from headset to handsfree mode:

• Press the Headset key, and then press

(SPEAKER). The Headset key turns OFF. Use

the handsfree speaker to communicate with your party.

To go from handsfree to headset mode:

• Press the Headset key. The Headset key turns ON. Use your headset to communicate with

your party.

Muting a Call

To mute your phone so your party cannot hear you:

• Press

(MUTE). The (MUTE) key turns ON.

To turn Mute off and return to the conversation:

• Press

(MUTE) again. The (MUTE) key turns OFF.

People

The People Application is a scrollable list of contacts from which you can make a call. The 5320

holds a maximum of 50 People contacts. Using the User Web Configuration tool, the maximum is

60 contacts, but only 50 will display on the phone set.

People entries contain the contact’s name (maximum of 20 characters), and the contact's

number, SIP URL, or IP address.

Note: The SIP URL and IP Address are programmable from the Web Configuration

Tool only.

To create, modify, or make calls from your People using the Web Configuration Tool, access the

tool’s People page (see Accessing the Web Configuration Tool on page 9).

Create a People Entry

1. Press MENU , and then press >> until PEOPLE? appears.

2. Press OK. PEOPLE: <number of items> appears.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 60 61

Keine Kommentare

Mitel SIP USER AND ADMINISTRATOR GUIDE 5320 Spezifikationen Seite 29